MPCV12060 - Water Softener MP CK 60 - 1 1/4” - Volume

The MP CK series water softeners, configured in a bi-body version, are designed for use in residential and commercial environments, ideal for medium flow needs. The Clack WS1.25 CI valve with volumetric control provides a constant supply of softened water, reducing the need for manual interventions and optimizing salt consumption.

How a water softener works

The MP CK water softeners use ion exchange resins, regenerated with a sodium chloride solution, to remove limescale from the water. This process prevents the buildup of deposits, reducing energy consumption and increasing the lifespan of the systems.

What is a water softener for

The water softener protects systems and appliances from limescale deposits, improving energy efficiency and reducing the use of detergents. Softened water also contributes to a lower environmental impact.

Technical specifications:

Liters of resin: 60 l
Salt tank capacity: 140 l
Flow rate: 4300 l/h
Dimensions: Ø 350mm, H 1310mm
Cyclic capacity: 360 m³/°F
Valve: Clack WS1.25 CI volumetric, with 1 1/4” connection
Power supply: 12V with included power adapter
Maximum operating pressure: 6 Bar
Maximum operating temperature: 30°C

Technical specifications of the Clack WS1.25 CI valve:

Top-mounted control valve suitable for residential automatic water softening or filtration systems
Single valve, also available for alternating duplex, parallel, and multitank systems
Solid-state microprocessor with easily accessible settings from the front panel
Four regeneration start modes: immediate volumetric, delayed volumetric, delayed timer, or pressure differential
Programming with measurement units in ppm, French degrees, German degrees, or m³
Programmable regeneration cycle sequence (up to 9 cycles)
Regeneration cycle times fully customizable
Programmable regeneration frequency from 1 to 28 days
Lithium battery with up to 24 hours of autonomy in case of emergency
Brine tank filling with treated or untreated water, with available hardness mixer
Certified according to NSF / ANSI 44, 61, and 372 standards

For graphic customization requests, including company logos and corporate colors, please contact our sales office at: commerciale@italywater.it.

Compliant with D.M. 25/2012. 
Compliant with D.M. 174/2004.

For further details, please refer to the related technical documentation.