DTCV10019 - Water Softener DT CK 19 - 1” - Volume

The DT CK series water softeners, designed in a bi-body version for residential and commercial applications, are ideal for treating water with moderate consumption. The CK 19 model, with a capacity of 19 liters of resin, ensures effective scale reduction, preserving the efficiency of plumbing systems and appliances.

How a water softener works

The DT CK water softeners use ion exchange resins, regenerated with sodium chloride, to eliminate scale from water. This process preserves the systems, reduces energy consumption, and prevents the formation of deposits.

What a water softener is for

The use of a water softener prevents the accumulation of scale in pipes and appliances, improving energy efficiency and reducing the use of detergents, resulting in cost savings and a lower environmental impact.

Technical specifications:

Liters of resin: 19 l
Salt tank capacity: 85 l
Flow rate: 2000 l/h
Dimensions: Ø 240mm, H 960mm
Cyclic capacity: 114 m³/°F
Valve: Clack WS1 TC timed, with 1” connection
Power supply: 12V with included power adapter
Maximum operating pressure: 6 Bar
Maximum operating temperature: 30°C

Technical specifications for Clack WS1 CI valve:

Top-mounted control valve suitable for residential automatic water softening or filtration systems
Single valve, also available for alternating duplex, parallel, and multitank systems
Solid-state microprocessor with easily accessible settings from the front panel
Four regeneration start modes: immediate volumetric, delayed volumetric, delayed timed, or pressure differential
Programming with measurement units in ppm, French degrees, German degrees, or cubic meters
Programmable regeneration cycle sequence up to 9 cycles
Fully programmable regeneration cycle times
Regeneration frequency configurable from 1 to 28 days
Retains system configuration and operating data in non-volatile memory
Emergency lithium battery with up to 24 hours of autonomy
DC power supply with 15-volt level VI output for safe installation
Optimized control valve design for efficient operation and backwashing
Brine tank filling with treated or untreated water
Adjustable hardness mixer available
Integrated salt depletion alarm
Certified according to NSF / ANSI standards 44, 61, and 372

For graphic customization requests, including company logos and corporate colors, please contact our sales office at: commerciale@italywater.it.

Compliant with D.M. 25/2012. 
Compliant with D.M. 174/2004.

For further details, please refer to the related technical documentation.