DXAP125/764-4 - DX AP Duplex Industrial High Flow Water Softener 125 Liters - Timer 764 with Programmable Volume

The DX AP series water softeners in duplex configuration are designed for high flow industrial applications. Equipped with high-quality components, they ensure softened water for applications requiring high flow rates and minimal maintenance interventions. The Autotrol Magnum valve with programmable Logix Timer guarantees reliability and ease of use.

How a water softener works

Water softeners use ion exchange resins to eliminate the minerals responsible for limescale in water. These resins are regenerated with a sodium chloride solution, restoring the softening capacity. Regeneration can occur on a time basis, volume basis, or manually.

What is a water softener used for

Using a water softener prevents the accumulation of limescale in systems and connected devices, reducing energy consumption and prolonging the lifespan of equipment. Additionally, softened water reduces detergent consumption and preserves the shine of surfaces and the functionality of faucets.

Technical specifications:

Liters of resin: 2 x 125
Salt tank capacity: 2 x 190 l (2 tanks)
Flow rate: 6500 l/h
Reinforced polyethylene cylinder with fiberglass: Ø 450 mm, H 1610 mm (2 cylinders)
Cyclic capacity: 750 m³/°F
Valve: Autotrol Magnum with 764 volume Logix timer, 2" connections
Power supply: 12V, with included power supply
Maximum operating pressure: 8 Bar
Maximum temperature: 30°C
Round tank 190 liters: Ø 56 x H 112 cm

Technical specifications for Magnum Twin valves:

Valve body made of Noryl plastic material, NSF listed, with stainless steel 304 cylinder adapter
EPDM seals
Electronic volumetric valve
MULTITANK version for parallel operation
TWIN version for alternating duplex or parallel duplex operation
Composed of 2 valves (master and slave) with 764 volumetric timer
Operating flow rate: Kv 18.20
Backwash flow rate: Kv 20.22 with ?P 1.72 bar
Resin range: 100 ÷ 700 liters
Brine line ¾" male, Drain line 1 ½"
Auxiliary and drain signal: Jaco ¼" tube
Cylinder connection 4"-8 UN male
Diffuser tube diameter: 1.5" (48.3 mm)
12/230V power supply included
Installation and accessories: It is recommended to install a pressure reducer and a check valve upstream of the system (not included).

For graphic customization requests, including company logos and corporate colors, please contact our sales office at: commerciale@italywater.it.

Compliant with D.M. 174/2004
Compliant with D.M. 25/2012.
For further details, please refer to the related technical documentation.