Pro Box Direct Under Sink 
Cod.: PW334B
Availability: available
 
Register to view prices
Impianto senza centralina B220, non conforme al D.M. 25/2012:


Share:

 
  • Description
  • Data Sheet
  • Attachment
  • Comments (0) 

Pro Box Direct is a line of professional quality continuous cycle products with a stainless steel body and a brass rotary pump, guaranteeing a high production of refined water up to 150 litres/hour.

Reverse osmosis equipment for domestic use for the treatment of drinking water. The system must undergo routine maintenance.

Two sizes available:

- Pro Box Direct 100 with 2 x 150 gallon membranes, rotary pump and production of 100 litres/hour of refined water;
- Pro Box Direct 150 with 2 x 280 gallon membranes, rotary pump and production of 150 litres/hour of refined water;

Two pre-treatment stages:
- 1st sediment cartridge in line 5 µm, 2.5";
- 2nd activated vegetable carbon cartridge (coconut) in line 2.5".

Plant dimensions: 46x 39 xh 12.4cm;
Dimensions with box: 49 x 21 xh 43cm;
Weight: 11 Kg.

As required by Ministerial Decree n.25 of 7 February 2012, if the system is installed for potable use, it must be equipped with a system which blocks the supply of water and notify the user that maintenance is required. This warning must be audible and visual. This system is guaranteed by the control unit, designed by Italy Water Group.

Two pre-treatment stages:
- 1st sediment cartridge in line 5 µm, 2.5";
- 2nd activated vegetable carbon cartridge (coconut) in line 2.5".

- AISI 304 stainless steel body;
- Rotary pump in brass;
- Ventilated RPM 180 watt electric motor;
- Control pressure gauge: stainless steel case with glycerine
Ø40mm;
- Quality fittings and tubing: John Guest/DMFit;
- Maximum pressure switch in plastic;
- Plastic minimum pressure switch;
- Solenoid valve: 230 VAC;
- Mixing system: DMFit needle valve;
- Flow regulations: John Guest ball valve;
- 2 Reverse osmosis membranes;
- flow regulator: online;
- Faucet: Elegant small in AISI 304 stainless steel;
- Installation kit: water intake, drain tie, pipe.

Manual for installation, use and maintenance:
- BarCode complete version;
- Fast paper.

The main characteristics of the unit designed by Italy Water are:

> Anti-flooding system;
> Automatic flushing;
> Alert for filter replacement both by time and by volume with or without water supply block, reset and restore;
> Management of minimum and maximum pressure switches, pump and solenoid valve;
> Signalling: acoustic buzzer;
> Activation and deactivation of the functions via Dip-switch;
> Power supply: 240VAC;
> Made in Italy, designed by Italy Water Group.

WRITE A REVIEW

Please log in to leave your comment or rating on the product